EXPRESS WASH (Automatic Machine Run)

Wheels and chassis are blasted with high volume water to remove dirt and grit.

Vehicle is sprayed with hot detergent.

Automated brushes scrub trailer curtain / sides.

High pressure /high volume water blasts dirt and grime from vehicle, concentrating on wheel / chassis areas.

Finally, three fresh water arches rinse the vehicle clean.

FLEET WASH

Wheels and chassis are blasted with high volume water to remove dirt and grit.

Vehicle is sprayed with hot detergent.

Vehicle is parked in prep area. (Between elevated work platforms).

Our dedicated team clean the following areas using brooms, brushes and sponges.

All glass areas, front and sides of cab, chrome exhaust stacks, wheels, fuel tanks, mud guards, tool boxes and rear doors of the back trailer with special attention to light cluster and warning signs.

When our team is finished, the driver moves the truck forward.

Automated brushes scrub trailer curtain / sides.

High pressure /high volume water blasts dirt and grime from vehicle, concentrating on wheel / chassis areas.

Finally, three fresh water arches rinse vehicle clean.

PREMIUM WASH

Cab: All external painted surfaces including rear of cab, external glass, wheels and guards are scrubbed using brooms, brushes and sponges. Bull bars and forward facing painted surfaces may need additional attention to remove bugs by the use of a non-scratch scouring pad. Exhaust stacks and chrome “elbows” are cleaned with the used of steel wool.

Trailers: Wheels, guards, tool boxes and warning signs are scrubbed using brooms, brushes and sponges. The Combing rail is washed using broom or brush. Chassis are cleaned by pressure gun, if chassis rails are exposed and a feature of the trailer they will be broomed. Rear doors and middle of B-doubles doors are scrubbed using a long broom. Light clusters and warning signs will get special attention. If a driver requests behind buckles are broomed, the driver is to undo the buckle and is responsible for their security.

Tippers: Bins may be raised to allow chassis to be broomed easily and prevent “shadow”.

Tankers: Extra attention is taken around support flanges and the side of the walkways are broomed as the truck slowly drives past the elevated gantry (driver is to watch our staff for instructions).

After the truck has been manually cleaned in the main wash area, it enters the Express tunnel for the automated trailer brushes (if required) then a final rinse.

A final inspection is completed at the end of the tunnel.